To qualitatively rewind the speedometer on some cars, you will have to work hard. After all, the mileage can be written at more than ten different points. Accordingly, it will cost a lot.
You can easily use the mileage filter to correct and ultimately stop the mileage. There are solutions for most modern cars equipped with Can-Bus. The device is connected without soldering, cutting wires, or other complex modifications. You plug it into the stock sockets, and you’re done. Depending on the car, installation of the device takes at most 1-2 hours.
How does the mileage filter work?
The device works on the principle of a filter configured to pass signals in a specific frequency range. It connects to the Can bus and blocks the passage of pulses from speed sensors, ABS, and other systems. Thereby:
- Everything happens safely for the car. The device for stopping the speedometer does not generate any signals. It simply blocks the impulses responsible for changing the data and mileage.
- The mileage stops in all blocks and systems where it is recorded.
- The device is invisible to any diagnostic equipment. Even dealer scanners do not see the device connected to the car. Thanks to this, it is suitable even for warranty machines.
Mileage is possible in all electronic units and systems of the car. If you can find a place where readings change after turning on the device, we will refund 100% of the cost.
To install the device to stop the speedometer on the car, you will need no more than 1-2 hours. On almost any model of the machine, this can be done by hand (installation instructions are included). You can also contact the technical center.
Control Features
You can turn the on and off device to stop the run, both on a stationary car and on the move. Depending on the brand and model, there are two on/off options available:
- Using the most common switches on the steering wheel.
- From the remote control included with the device. It has small dimensions. There are no problems with convenient and secretive placement.
This device has many universal properties, opening up vast possibilities for each user. It fits:
- Those who often change cars, preferring one brand. It is possible to reprogram for another car (it is essential that the connectors in the Can-bus match). This can be done in technical centers.
- To freeze the mileage on a car from the corporate fleet. Due to the ease of installation/dismantling, it is possible to rearrange the device to stop the odometer from one car to another (for example, before an extended business trip).
- After replacing or overhauling the engine. In some cases (depending on the car), stopping the run will be better than rewinding it.
In today’s market, you can easily choose a device that suits all parameters to provide the required functionality. When choosing, you should pay attention to the build quality of the structure, appearance, and technical characteristics, which will allow you to opt for a specific solution, minimizing possible costs in the process.
It is also best to entrust your choice of products to trusted manufacturers. They only use proven technology to ensure the best results for every user. At the same time, you can stop the mileage count and complete the required tasks in a few minutes.
